Processor
modules for
A2
controller
are improved with
the development of
PC
technology and
always have
the actual
processors
and memory.
Processor
module consists
of three
circuit boards:
-
ETX
module -
contains a
processor,
chipset
and memory
-
ETX
support -
where are
the USB
ports,
LAN, PS
/
2,
and
ISA
CMOS
battery
-
HDD
bracket
-
where there is a
HDD,
CompactFlash,
COM port,
isolated RS422
and RS485
Thanks to this
arrangement,
the processor
module
format
remains the same
regardless of the
current
configuration.
Each
processor
module
has the following
peripherals:
Processor
module,
like all
other modules,
is a vertically
oriented, which means
that the natural
circulation of
air
(warm
air moving
upward)
facilitates
cooling modules.
Therefore
modules
with low
consumption (low
power) does not
require
forced
cooling
fan.
High
performance
processor
modules
require forced
cooling,
but the fan
does not have to
constantly
work
at higher power.
That's why
we created
a system
to
control
the fan,
which reduces engine
speed when
there is no need
for increased
cooling.
In this way
dramatically
extends
fan
life
and reduces
the possibility of
cancellation.
The
following processor
modules are actual:
A2-55-PC C2D |
Core 2
Duo
processor
module with
i945GM
chipset
and 1
-
2GB
DDR2
RAM.
CPU
module for
demanding
applications.
Allows the user
a large
number of operations
per second
and quickly
calculate
the required
calculations in
industrial systems
for measurement and
control.
Requires
active cooling
(fan),
but thanks to
a large
cooler,
can operate
from
1 / 2 to
several hours
with no fan,
depending on the
ambient temperature.
The integrated
graphics
supports
resolutions up to
2048x1536
and 3D
acceleration
required
for the
Aero
interface.
Support for
IDE
(PATA)
and
SATA2
hard
drives and
SSDs.
CompactFlash
is connected
to IDE primary
slave,
but you can
adjust it to
be a master.
Bilateral
buffers
are set to the ISA
bus so
one processor
could communicate
with up to
20 I /
O
modules |
|
A2-55-PC A1.6 |
Intel
ATOM
processor
with 1GB
memory
module.
This module
can operate without
forced
cooling
due to
the vertical
orientation of
A2
controller
that facilitates
natural
air circulation.
It is
exceptional in
applications where
the maximum
of processor power is
not necessary,
but
require high
reliability.
The graphics supports HD
resolution
D
acceleration
required
for the
Aero
interface.
Support for
IDE
(PATA)
and
SATA2
hard
drives and
SSDs.
CompactFlash
is connected
to the primary
IDE
slave,
but you can
adjust it to
be a master.
Bilateral
buffers
are set to the ISA
bus so
one processor
could communicate
with up to
20 I /
O
modules |
|
|